Monday, September 19, 2011

Mk IV Prototype Nozzle With a 36.5mm Nozzle Holder






I have had a request to test a 36.5mm Mk IV nozzle holder.  So, I machined this little guy out and it is going to be shipped out tomorrow.   In addition to machining out the vents, I have also added flats, for a 1/2" (13mm) wrench, so that it is easier to disassemble.  I have installed the standard (version 1) brass nozzle/heater as that has been proven to work.

No comments:

Post a Comment